Portable Sawmilling
Turning your trees into timber for you.
How We Do It
Working with our customers, we have a range of sawmills to process trees. We will advise on which is best based on the logs, their location, the timber desired, and the end use. We can come to you, or help arrange the delivery of logs to our yard, depending on quantity and size.
-
This Wood-Mizer LT40 sawmill produces a high yield from logs, particularly those with a smaller diameter. It is very fast and efficient, with the ability to process a single log into various sizes of timber.
The maximum log size that can be cut is 800mm diameter and 6.1m in length. The widest board that can be cut is 600mm in width, and the depth can vary from 800mm to 20mm. Logs are easily and quickly loaded and turned hydraulically with loading arms and a steel claw turner.
-
The Granberg Alaskan 60in Mill is a chainsaw mill, perfect for slabbing large logs. While it is slower than the Wood-Mizer, taking between 5-10min per meter of cut (depending on the species of timber) and more manually intense, it is extremely portable.
The maximum log size that can be cut is 1400mm in diameter. There is no limit to the length of the cut, however, for ease of handling it is recommended that logs are no longer than 3m. Logs can be milled where they lay and do not require adjustment. This is a great option for areas with difficult access or logs too large to safely handle with the equipment available.
The Process
Enquire
Enquire now to discuss what milling work you require. We can also assist with the planning and preparation of the site. We are able to provide a consultation, helping you determine what trees are best to mill, how best to set up a site and potential uses for your timber.
Estimated Cost
Once we have an understanding of the work that is required we will draft up an estimate for the job. Once this estimate has been accepted, the milling can be scheduled.
Milling
We will tow the mill to your job site and begin work. If you have someone available, it is recommended that you assist with the unloading and stacking of the boards, as this will allow us to focus on milling. It is also recommended to have a machine able to move the logs.
-
Milling charges are $150/hr + GST, inclusive of labor and machinery cost. A minimum 2 hour fee of $300 plus GST applies to all jobs when traveling offsite. If you’re able to transport the logs to us, a minimum 1 hour feed of $150 plus GST applies.
We can also provide a consultation service, at a fee of $70 per hour, plus GST and a travel fee.
Additional charges that may apply. This includes mileage if travelling (based off the current IRD rate). If metal strikes occur a 50% cost of the blade will apply. If overnight stays are required a cost of $50 per night will apply. This will be waved if you’re able to provide accommodation and food.
Working Together
If you're interested in working with us, complete the form with a few details about your project. We'll review your message and get back to you as soon as possible.
